Serving Amarillo, Canyon & the Texas Panhandle Free on-site estimates (806) 484-1283
Call for a free estimate(806) 484-1283
Home › Services › Pipe Fences
Pipe & Ranch Fences · Amarillo

Pipe Fence Installation in Amarillo, TX

Out on Panhandle acreage, nothing beats welded pipe. We build pipe rail, pipe-and-cable and pipe-and-wire fences for road frontage, horse pens and pastures around Amarillo, Bushland, Canyon and the canyon-rim communities.

  • Free on-site estimates
  • Built for Panhandle wind
  • Wood, iron, pipe, chain link & vinyl

Get Your Free Estimate

Tell us what you need fenced. It takes about 30 seconds and there's no obligation.

By submitting, you agree we may call or email you about this request. No spam, ever.

  • Free on-site estimates
  • Permits & HOA paperwork handled
  • Old fence tear-out & haul-away
  • Wood · Iron · Pipe · Chain link · Vinyl

Why Pipe Fence Fits the Panhandle

Pipe fencing grew up on High Plains ranches for good reason. It's heavy, it's welded into one rigid frame, and wind, snow and livestock barely move it.

  • Wind doesn't matter. A rail-and-cable fence is almost all open space.
  • Livestock-safe: smooth rails and cable are kinder to horses than barbed wire.
  • Decades of service: a painted pipe fence keeps its looks with an occasional fresh coat.
  • Curb appeal on acreage: a white or black pipe frontage fence with an entry gate says "ranch" from the road.

Inside Amarillo city limits, barbed wire is only allowed on agricultural or grazing land, so pipe with cable or no-climb wire is the usual choice for horse properties near town.

Welded pipe fence joint with a capped post
Pricing

How Much Does Pipe Fence Cost Around Amarillo?

Pipe fence pricing depends on rail count, pipe size and whether cable or wire is added.

Welded pipe fence (rail, cable or wire)
$14–$40
per linear foot, installed
One-acre perimeter (about 835 linear feet)
Often $11,000–$33,000

Every lot is different. Your free on-site estimate turns these ranges into one exact, written price. More detail in our Amarillo fence cost guide.

Planning a Pipe Fence

What are you fencing in?

Horses need height and no sharp edges; cattle need strength at the corners; goats and dogs need tight wire low to the ground. Tell us what lives behind the fence, and we'll size the posts, rails and fill to match.

Rails, cable or wire

All-pipe rail fences look the best and cost the most. Pipe-and-cable is the strong, economical middle ground. No-climb wire on a pipe frame is the safest choice for horses and small animals.

Post spacing and corners

Corners and gate openings take all the strain. We set them deeper, brace them, and weld them solid so the fence stays straight for years.

Paint

White is classic on frontage. Black and dark green blend into the prairie and show less dust. We prime and paint after welding so every joint is sealed.

Jurisdiction

Acreage around Amarillo may sit in unincorporated Potter or Randall County, inside a small town like Bishop Hills, or in a deed-restricted community like Timbercreek Canyon. We check which rules and restrictions apply before we design the fence.

The process

How a Pipe Fence Goes In

Pipe is heavy work, but the process is simple.

Walk the property

We walk the line with you, mark corners, gates and low spots, and give you a written quote.

Locates

Texas811 marks utility lines, which matters on rural lots with buried power and water lines.

Set posts

Pipe posts are set in concrete at the corners and gates, and driven or set along the line.

Weld rails and fill

Rails are welded on, then cable is tensioned or wire is stretched and attached.

Prime, paint and gates

Every weld is primed and painted, and gates are hung and latched.

Pipe Fences on Canyon-Country Lots

Southeast of Amarillo, communities like Timbercreek Canyon and Lake Tanglewood sit right at the head of the Palo Duro Canyon country, where flat ground breaks into draws and slopes. Pipe is one of the few fences that follows that terrain well. Each section can step or rack with the ground, and the open design keeps canyon views wide open. On rocky or caliche-heavy ground we adjust post setting so every post ends up solid, not just deep enough to look right.

Need something lighter closer to the house? Many acreage owners pair pipe frontage with a wood privacy fence around the patio or a chain link dog yard.

Welded pipe ranch entry gate on Panhandle acreage

Entry Gates and Cattle Guards

The entrance is the part of a pipe fence everyone sees. We build:

  • Double pipe drive gates wide enough for a truck and stock trailer.
  • Walk-through gates next to drive gates for everyday access.
  • Pipe entry arches ready for your ranch sign.
  • Gate stops and chain latches that hold in a hard wind.

See all our gate options.

Frequently Asked Questions

How much does a pipe fence cost per foot?

Installed pipe fence usually runs about $14 to $40 per linear foot depending on rail count, pipe size and fill. We'll give you an exact written price after walking the property.

Is pipe fence good for horses?

Yes. Pipe rails or pipe with no-climb wire are among the safest horse fences because there are no barbs and the frame doesn't sag.

Can I use barbed wire near Amarillo?

Inside Amarillo city limits, barbed wire is allowed only on agricultural or grazing land and certain security fences. Outside the city, rules depend on the town or deed restrictions. We'll check for your property.

Do you paint the fence?

Yes. Every weld is primed and the fence is painted in the color you choose.

Can a pipe fence follow uneven ground?

Yes. Sections can step or follow the slope, which works well on canyon-edge lots.

Do you build pens and arenas?

Yes, including horse pens, runs and small arenas built from pipe and panels.

Get Your Free Pipe Fence Estimate

Call now or request a free on-site estimate. Written quote, no cost, no obligation.

  • Free on-site estimates
  • Permits & HOA paperwork handled
  • Old fence tear-out & haul-away
  • Wood · Iron · Pipe · Chain link · Vinyl
Call NowFree Estimate